In a world where businesses rely on fast, secure, and predictable data transport between sites, Ethernet Virtual Private Line (EVPL) services have become a cornerstone of enterprise connectivity.
EVPL bridges the gap between private networks and cloud environments, enabling organizations to connect offices, data centers, and cloud on-ramps seamlessly without exposing sensitive traffic to the public internet.
An Ethernet Virtual Private Line (EVPL) is a private, Layer 2 Ethernet service that provides dedicated point-to-point or point-to-multipoint connectivity between locations. It allows enterprises to run multiple virtual circuits from a single physical handoff, creating flexible network topologies. This setup makes it possible to link multiple branches or facilities into one wide area network (WAN) while maintaining isolation and performance consistency.
In simpler terms, EVPL acts like a private, high-speed data highway between your sites, offering low latency, predictable performance, and enhanced security for mission-critical applications.
An EVPL connection is established between two User-to-Network Interfaces (UNIs) located on the customer’s network equipment - one at the source and one at the destination. These UNIs are connected through the provider’s Ethernet network, which carries traffic securely across dedicated virtual circuits. The physical handoff can be delivered over copper or fiber, with fiber being the preferred medium for higher bandwidths, often reaching up to 100 Gbps.
In a typical EVPL network, a hub site connects to multiple branch sites through separate virtual circuits, allowing administrators to control bandwidth allocation and apply unique policies per site or application. By keeping all data on a private Layer 2 path and off the public internet, EVPL ensures secure, predictable, and scalable communication for enterprises of any size.
There is a strong chance your organization will benefit from an Ethernet virtual private line if any of the following apply:
If one or more items fit your situation, an Ethernet Virtual Private Line (EVPL) is likely a good answer for your transport needs.
Your traffic stays on private lines rather than the public internet. That isolation reduces exposure to common internet-based threats and gives security teams clear control over how traffic enters and leaves each site.
You select the bandwidth that matches your needs and avoid the congestion seen on shared networks. The result is lower latency, fewer lags, and steady throughput for critical applications.
Fiber provides a direct path between locations at speeds up to 100 Gbps. That capacity supports real-time communications, data replication, and high-volume transfers without constant tuning.
Bandwidth increases are often software-defined. Upgrading a connection is usually a provider configuration change rather than a hardware replacement, which shortens lead times and keeps projects moving.
Compared to traditional multiplexing or TDM private lines such as T1 or T3, EVPL typically offers lower initial deployment costs and more favorable bandwidth pricing as you grow.
Choosing between Ethernet Virtual Private Line (EVPL) and Ethernet Private Line (EPL) depends on how you plan to connect locations and manage traffic. Both are private Layer 2 services that bypass the public internet. The differences are in topology, flexibility, and how traffic is carried.
EVPL supports multiple Ethernet Virtual Circuits on a single physical UNI. You can connect one site to many others and segment traffic per location, department, or application on the same port. EPL carries a single EVC for a simple point-to-point path.
With EVPL, you can partition capacity across virtual services on one link and align bandwidth to actual needs at each site or for each application. EPL dedicates the full pipe to one private connection, which is ideal when two locations need a consistently high-capacity, always-on path.
Because EVPL is built for one-to-many designs, providers may shape or rate-limit broadcast and multicast traffic to protect overall performance. EPL is typically more permissive because it is a single private circuit.
EVPL uses VLAN-based separation, which can affect how certain Layer 2 control frames are handled. If your environment relies on specific control protocols at the handoff, confirm behavior during design. EPL is generally simpler in this regard because it is one circuit end to end.
Adding new locations is straightforward with EVPL. You can extend your reach and bring up new virtual services without turning up a new physical port at the hub. EPL is simple by design, but changes typically require provisioning a new circuit.
Choose EPL when you need a dedicated, high-performance path between two locations such as a data center to headquarters. Choose EVPL when you need one-to-many connectivity, segmented services, and easier growth from a single aggregation point.
While both EVPL (Ethernet Virtual Private Line) and MPLS (Multiprotocol Label Switching) are used to connect multiple business sites with private, high-performance links, they differ significantly in how they operate, scale, and deliver traffic across the network. Below are the main distinctions between the two technologies.
EVPL operates at Layer 2 (Data Link Layer) of the OSI model, using Ethernet technology to establish virtual circuits directly between customer locations. It essentially extends your LAN over the provider’s backbone.
MPLS, on the other hand, functions between Layer 2 and Layer 3, using labels to route traffic efficiently through the provider’s network. This gives MPLS more flexibility in handling diverse types of traffic, including IP packets, voice, and video.
EVPL typically supports point-to-point and point-to-multipoint configurations. It’s ideal for organizations that want predictable Ethernet-based connectivity between a few defined sites.
MPLS supports a full mesh topology, where any site can communicate directly with any other site without routing traffic through a central hub. This makes MPLS more suitable for large, distributed enterprises.
MPLS is known for its advanced Quality of Service (QoS) capabilities. It can prioritize traffic based on type ensuring that time-sensitive applications like VoIP and video conferencing get precedence over less critical data.
EVPL offers consistent bandwidth and low latency, but traffic prioritization is generally managed by the customer at the network edge rather than by the carrier within the network.
EVPL delivers high throughput and low latency by providing dedicated virtual circuits that don’t share paths with public internet traffic. It’s highly scalable in bandwidth from Mbps to 100 Gbps, but usually limited in terms of complex routing.
MPLS provides flexible scalability across many locations and supports more dynamic traffic engineering. However, MPLS networks can be slower to scale in bandwidth compared to EVPL due to routing complexity and service provisioning times.
EVPL is generally more cost-effective for organizations that need predictable Ethernet transport between a limited number of sites or for high-volume data transfers.
MPLS tends to be more expensive because it offers greater routing flexibility, built-in redundancy, and integrated QoS. It’s often used by enterprises with global footprints and complex networking needs.
Connect regional offices to a central data center or cloud on-ramp and allocate policies per branch. EVPL’s virtual circuits let you separate teams or applications without extra physical ports.
Extend Layer 2 domains across a metro area while keeping your switching model intact. EVPL carries your VLANs across town so you do not need to redesign routing for every site.
Preserve existing segmentation and security policies end to end. EVPL helps you transport VLANs and maintain familiar traffic patterns between data centers and campuses.
Support latency-sensitive traffic such as voice, collaboration, backup, and replication. Provider QoS at Layer 2 keeps priorities consistent across locations.
EVPL is a standards-based Ethernet service that integrates cleanly with existing switching and routing.
UNI (User-to-Network Interface) is the physical handoff between your equipment and the provider. EVC (Ethernet Virtual Circuit) is the logical path across the provider network. EVPL supports multiple EVCs on one UNI for clean service separation.
EVPL can prioritize time-sensitive applications with traffic classes aligned to latency, jitter, and loss targets. If you run voice, collaboration, real-time analytics, or storage replication, confirm the traffic classes and QoS markings at the handoff.
Look for clear targets for uptime, latency, jitter, and packet loss. These metrics help you validate performance at turn-up and over time.
Tiers typically range from low Mbps to multi-Gbps, with fiber options scaling to 10 or 100 Gbps. Upgrades are often software-defined so you can increase bandwidth without hardware changes.
EVPL is a private Layer 2 service that keeps traffic off the public internet. Many organizations rely on that isolation plus existing network policies to lower risk. Depending on your requirements, you can layer in additional controls.
Provider-enabled options such as MACsec or managed encryption may be available. You can also apply customer-managed overlay encryption at the edge for specific data classes or compliance needs. Segmentation using multiple EVCs and VLANs on one UNI lets you keep business units and applications separate without forcing all traffic through a Layer 3 core.
A successful deployment follows a simple plan: assess, select, integrate, and test.
List your sites, traffic patterns, and application priorities. Document compliance needs and planned growth. This will drive bandwidth tiers, QoS classes, and the number of virtual services you will need on each UNI.
Evaluate reliability, support model, SLAs, and change agility. Confirm handoff options, demarcation, managed offerings, and whether a pure Layer 2 handoff or a managed routing add-on makes more sense for your team.
Map VLANs to EVCs, define QoS markings, and plan for failover. Validate compatibility with your switches and routers. Confirm optics, port types, and high-availability needs at the handoff.
Turn up sites in stages. Run acceptance tests for latency, jitter, and loss. Verify QoS behavior under load. Conduct a failover drill so your team knows how the service behaves during maintenance or an outage.
Ethernet Virtual Private Line gives you private, predictable transport with bandwidth and QoS aligned to your applications. It scales cleanly as you add sites or increase capacity, and it integrates seamlessly with the network you already own.
If you’re exploring EVPL for new branches, data center interconnects, or cloud on-ramps, start with a short requirements assessment to identify the ideal bandwidth and service classes for your business.
Build a faster, more secure network with Fatbeam. Request a custom EVPL quote today.
You can add new sites by provisioning additional virtual circuits on the existing UNI at your hub. This avoids new physical ports in many cases and keeps expansion fast and predictable.
EVPL provides private transport rather than default encryption. Many providers offer MACsec or managed encryption. You can also use your own overlay encryption at the edge if policy or compliance requires it.
Upgrades are often a software change in the provider configuration, which shortens lead times. Timelines vary by provider, but EVPL is designed for straightforward capacity increases.
Pick EPL for a single, dedicated point-to-point path between two locations that need constant high capacity. Choose EVPL when you want one-to-many connectivity with separate virtual circuits and the flexibility to grow from a single aggregation point.